How To Change The Keyfob Battery For A Jaguar F-Pace (2016–2019)
The 2016–2019 Jaguar F-Pace uses the KVM-era proximity smart key. Replacing the battery is straightforward and takes just a few minutes.
What You'll Need
- The keyfob itself
- Flat screwdriver or coin
- New CR2032 battery
Step-by-Step Instructions
Slide out the emergency blade
Press the release button on the side of the fob and slide the metal emergency key blade out completely.
Find the seam gap
With the blade out, inspect the narrow seam around the keyfob edge. You'll see a small gap near the key blade slot — this is your entry point.
Open the casing
Insert the flat edge of the emergency blade into the seam gap and twist gently. The two halves will begin to separate. Work slowly around the seam — do not force it.
Remove the old battery
Lift the CR2032 battery out with your fingernail or the screwdriver edge. Avoid touching electronic components on the circuit board.
Insert the new battery
Place the new CR2032 battery with the positive (+) side facing UP. Press gently until it sits flat and flush in the compartment.
Clip the keyfob closed
Line up the two halves and press together firmly around the edges until you hear and feel them clip shut. Check for any gaps.
Reinsert the emergency blade
Slide the emergency blade back in until it clicks. Test the buttons to confirm the replacement worked.
Pro Tip
Hold the keyfob close to the door handle the first time you use it after a battery replacement — it may take a moment to reconnect.
Key Still Not Working?
If a fresh battery doesn't fix the issue, the problem is likely the vehicle's KVM module, a de-synced transponder, or a faulty key — not the battery. We diagnose and fix this on-site, same day.